- Description
- Shipping Methods
- FSD F411 FC Betaflight firmware
Specifications
Notice:
-If your SBUS receiver don't need to be inverted signal(such as Full Speed's receivers), please use the D/S/P port one the up side.
-If your SBUS receiver need to be inverted signal, please use the SBUS port on the other side.
Pay attention:
-The FSD F411 flight controller will support a gyro loop rate of up to 32khz however maximum pid loop frequency is limited to 16khz. To run at this speed you will need to overclock the CPU by entering the code: Set cpu_overclock = 120mhz in CLI.
-In betaflight 3.4.0 and above CPU temperature can be monitored directly in betaflight osd.
Click here for FSD F411 FC firmware download
Specification:
Brand name: FullSpeed
Item name: FSD428 Flight Tower
Weight: 7.8g
Usage: for 85mm-250mm Frame Kit
FSD F411 Flight Controller Board
CPU: STM32 F411
Input Voltage: 2-4S Lipo
Built-in Betaflight OSD to adjust PID
BEC Output: 5V/3A
Size: 27.5x27.5mm board, 20mm mounting holes (M2)
Weight:3.4g
Support SBUS/PPM/DSM receiver
FSD 28A BLHeli_S 2-4S ESC
Input Voltage: 2-4S Lipo battery
Constant Current: 28A
BEC Output: NO
Size: 27x27mm (main board)
Installing Hole:20x20mm,M2
Weight: 4g
MOS Tube: TOP QUALITY MOSFET
Protocol: DSHOT600/300/150/Oneshot125/42,MultiShot
Package Included:
1x FSD F411 Flight Controller
1x FSD 28A 2S-4S 4in1 ESC
Product reviews can be carried out after the member login, please click here to login